EXPERIMENT: Autonomous Electromagnetic Floaters
Purpose
This note records a possible experimental program for the future Experiments section of the PRINCIPIA GRAVITATIS archive.
The central idea is simple:
Place independently controllable electromagnetic structures into a medium in which they are free to move, rotate, interact, and communicate their own state.
The experiment is not intended initially to prove a particular interpretation. It is intended to create a physical environment in which electromagnetic interaction, resonance, motion, orientation, synchronization, and environmental disturbance can be observed together.
The attraction of the experiment is that the individual elements can become increasingly intelligent as the apparatus is scaled upward or downward.
The Basic Floater
The first experimental object may be a small floating platform carrying electromagnetic hardware and sufficient electronics to measure its own state.
A modern smartphone is an unusually convenient starting point because it already contains many of the instruments required for observation.
- accelerometers
- gyroscopes
- magnetic-field sensing
- wireless communication
- processor and memory
- camera capability
- software-controlled timing
- potentially local machine-learning or AI processing
The smartphone therefore becomes more than a passive experimental object. It can become an instrument that carries its own instrumentation.
Rather than requiring an external tracking system to determine what happened to every floater, each unit could continuously report quantities such as position, orientation, acceleration, magnetic environment, and internal electrical state.
A Self-Reporting Experimental Object
The conceptual advantage is that the experiment becomes distributed. Each floater can observe both itself and its surroundings.
A sufficiently capable unit could report a state vector of the general form
\[ \mathbf{S}(t)= \left[ x(t),y(t),z(t), \theta(t), \mathbf{a}(t), \mathbf{B}(t), f(t), \phi(t), A(t) \right]. \]
The exact contents of this state vector are deliberately left open. The purpose is to establish the principle that the experimental object should be capable of reporting its own behavior rather than requiring every observation to be reconstructed externally.
This introduces an additional experimental possibility: the floater can make decisions.
A future unit could contain a local control process that observes its own state and chooses how to alter its electromagnetic condition.
The controller might adjust frequency, phase, amplitude, duty cycle, capacitance, inductance, or charge distribution according to rules defined by the experiment.
Eventually, the control process could be allowed to search for stable operating conditions without being given a predetermined spatial outcome.
The Experimental Substrate
Water provides a convenient initial substrate because it permits floating objects to move while providing measurable mechanical resistance.
The first apparatus can therefore remain small:
- one or more floating electromagnetic units
- a controlled water container
- electrical power
- external observation where useful
- software logging of the internal measurements
The environment itself can then become an experimental variable.
In particular, controlled agitation of the water may be introduced. The purpose is not to assume that mechanical agitation is equivalent to any cosmological background, but simply to determine how background disturbance affects the ability of floating interacting structures to organize themselves.
This produces a particularly interesting distinction:
Does background disturbance change the interaction, or merely change the rate at which the interaction becomes mechanically visible?
Scaling the Experiment
The experiment is naturally scalable.
Small Scale — Demonstration
A small floating unit can contain simplified LC circuitry and a microcontroller.
Several units could operate simultaneously in a small transparent container. The apparatus would provide a visual demonstration of electromagnetic structures interacting while independently measuring their own states.
Intermediate Scale — High School Laboratory
The smartphone can eventually be replaced by a much smaller electronics package.
The essential functions might become:
- microcontroller
- accelerometer
- gyroscope
- magnetic sensor
- wireless communication
- LC resonator
- controllable electromagnetic driver
- small power source
At this scale, the apparatus could become a classroom experiment in which students observe how independently controlled electromagnetic objects respond to frequency, phase, proximity, orientation, and environmental disturbance.
Large Scale — University Laboratory
A substantially larger experiment could use a circular water substrate on the order of \(10\,\mathrm{m}\) in diameter.
A circular geometry is attractive because it removes the obvious directional preference imposed by rectangular walls and provides a natural arena for rotational and radial organization.
The water could be excited using controlled ultrasonic drivers. The amplitude and frequency of the acoustic excitation could then become independent experimental variables.
The resulting system would contain several interacting layers:
- electromagnetic structures
- mechanical motion of the floaters
- water-mediated mechanical coupling
- controlled acoustic disturbance
- distributed sensing
- distributed computation
At this scale the experiment ceases to be merely a demonstration and becomes a laboratory environment in which collective behavior can be measured statistically.
Autonomous Electromagnetic Structures
The most interesting version of the experiment may be one in which the individual floaters are permitted to control their own electromagnetic state.
Consider a floater containing an LC resonator:
The resonant frequency is determined by the inductance and capacitance of the structure.
If the electronics can alter either quantity, or otherwise alter the effective resonant condition, the floater becomes a dynamically adjustable electromagnetic object.
It could then be possible to study questions such as:
- Do nearby resonators synchronize?
- Do they avoid one another?
- Do they seek particular orientations?
- Does frequency similarity increase interaction?